Air / Water Hose
Description
Application: AIR/WATER HOSESPECIFICATION : CONFORMS TO IS:446/1987(TYPE 1) & IS:444/1987(TYPE 2) “UNICOS” WATER HOSE- MEDIUM PRESSURE WASHDOWN – IS:444(TYPE 3B) SIZE 10MM & 12.5MM APPLICATION: A versatile general purpose Hose which can be used for a wide range of applications which include general construction work, engineering industries, shipyards, railways, mines, foundries, steel mills and project sites. Available in braided construction in long length and upto 30mtr length in large diameter. Available from 1/2″ to 4″ internal diameter.
SPECIFICATION : CONFORMS TO IS:446/1987(TYPE 1) & IS:444/1987(TYPE 2)
| SIZE(ID) | RECOMMENDED WORKING PRESSURE | ||
| MM |
INCH |
PLY/BRAID |
KG/CM2 |
|
12.5 |
1/2″ |
3/1 |
10.00 |
|
20.0 |
3/4″ |
4/2 |
10.00 |
|
25.0 |
1″ |
4/2 |
10.00 |
|
31.5 |
1-1/4″ |
4/2 |
10.00 |
|
38.0 |
1-1/2″ |
5/3 |
10.00 |
|
50.0 |
2″ |
5/3 |
10.00 |
|
56.0 |
2-1/4″ |
6/3 |
10.00 |
|
63.0 |
2-1/2″ |
6/3 |
10.00 |
|
75.0 |
3″ |
7 |
10.00 |
|
100.0 |
4″ |
8 |
10.00 |
3(B). “UNICOS” WATER HOSE- MEDIUM PRESSURE WASHDOWN – IS:444(TYPE 3B)
| 10.0 | 3/8″ | 2 | 27.20 |
| 12.5 | 1/2″ | 2 | 27.20 |
4. STEAM HOSE – LOW PRESSURE
APPLICATION: A multipurpose washdown hose for use with hot water or low pressure saturated steam used in dairies, paper mills, foundries, fertilizer plants, sugar mills and steel plants. Available in braided reinforcement in long length and upto 30mtr in large diameter.
SPECIFICATION : CONFORMS TO IS:10655(TYPE 1) & BS:5122/1975(TYPE 2)
| SIZE(ID) | RECOMMENDED WORKING PRESSURE | ||
|
MM |
INCH |
BRAID |
KG/CM2 |
|
12.5 |
1/2″ |
2 |
5.20 |
|
20.0 |
3/4″ |
2 |
5.20 |
|
25.0 |
1″ |
3 |
5.20 |
|
31.5 |
1-1/4″ |
3 |
5.20 |
|
38.0 |
1-1/2″ |
3 |
5.20 |
|
50.0 |
2″ |
3 |
5.20 |
|
63.0 |
2-1/2″ |
3 |
5.20 |
5. WATER SUCTION HOSE (LIGHT DUTY)
APPLICATION: Light duty suction hose is for use with water pumps in agriculture, industries, construction sites and for dewatering of pits and mines where the vacuum does not exceed 762mm of mercury – available in single wire embedded in both smooth and corrugated finish.
SPECIFICATION : CONFORMS TO IS:2482/1982
| MM | INCH | PLY | KG/CM2 |
| 31.5 | 1-1/4″ | 3 | 3.50 |
| 38.0 | 1-1/2″ | 3 | 3.50 |
| 50.0 | 2″ | 3 | 3.50 |
| 56.0 | 2-1/4″ | 3 | 3.50 |
| 63.0 | 2-1/2″ | 4 | 3.50 |
| 75.0 | 3″ | 4 | 3.50 |
| 88.0 | 3-1/2″ | 4 | 3.50 |
| 100.0 | 4″ | 4 | 3.50 |
| 125.0 | 5″ | 5 | 3.50 |
| 150.0 | 6″ | 5 | 3.50 |
| 200.0 | 8″ | 6 | 3.50 |
6. HEAVY DUTY WATER SUCTION AND DISCHARGE HOSE (MINES SLURRY WATER DISCHARGE HOSE – PROJECT QUALITY) APPLICATION: A heavy duty water suction and discharge hose for various uses encounterering severe service conditions in fire fighting, irrigation, agriculture, building industry, sewer cleaning, dam sites, mines and ships where a strong yet flexible hose is needed. Inner lining is specially designed for slurry water containing ironore particles for dewatering open cast and underground mines. Available in smooth or rough bore double wire embedded having plain or corrugated outer suface and with or witout built-in end connections.
SPECIFICATION : CONFORMS TO IS:3549/1983 TYPE 1, 2 AND 3
| SIZE(ID) | RECOMMENDED WORKING PRESSURE | |||
| TYPE -1 | TYPE -2 | TYPE -3 | ||
| MM | INCH | KG/CM2 | KG/CM2 | KG/CM2 |
| 50.0 | 2″ | 7.00 | 10.00 | 15.00 |
| 63.0 | 2-1/2″ | 7.00 | 10.00 | 15.00 |
| 75.0 | 3″ | 7.00 | 10.00 | 15.00 |
| 100.0 | 4″ | 7.00 | 10.00 | 15.00 |
| 125.0 | 5″ | 7.00 | 10.00 | 15.00 |
| 150.0 | 6″ | 7.00 | 10.00 | 15.00 |
| 200.0 | 8″ | 7.00 | 10.00 | 15.00 |
| 250.0 | 10″ | 7.00 | 10.00 | 15.00 |
| 300.0 | 12″ | 7.00 | 10.00 | 15.00 |
Send Your Order